White Oak Asymmetric Bookcase with Cabinet Doors | Woodworking Design

A 72-inch-tall white oak bookcase with staggered shelves, offset dividers and four inset cabinet doors. Separated middle shelves create a sculptural layout for books and display objects, while small walnut pulls contrast with the pale oak.

The case measures 42 inches wide and 11.25 inches deep. Construction includes housed shelf joints, dowelled dividers, a screwed plywood bracing back, mortised butt hinges, magnetic catches on wooden mounting blocks and a recessed centre support.

BUILD AND INSTALLATION This is a digital woodworking design, not a load-rated or physically tested plan. All four doors were checked at 90 degrees and returned closed in Mortise. The final model reports no overlapping or floating boards and no joinery warnings.

Secure the finished bookcase to wall studs or suitable structural masonry with rated anti-tip hardware attached to substantial case members. The thin back alone is not an anchoring point. Select anchors for the actual wall and follow manufacturer instructions.

Use acclimated quarter-sawn oak for the solid slab doors and confirm seasonal movement clearances. Dry fit the joints, verify actual hinge and catch templates, check screw and dowel drilling depths, and ensure the centre support bears firmly on the floor. Verify the assembled and anchored piece under its intended loads before use. No shelf load rating is claimed.

GALLERY Pictures 1 and 2 are actual Mortise renders. Pictures 3 to 5 are AI-generated room visualizations; small details may differ. Use the editable model as the construction reference.